Call 01282 437777

New site in development - adding new products every day - lots more to come! we will have everything you could want for Radio Control and Modelling

2.4G 4-Channel MICROLITE DSM2 /DSMX Receiver JST (JR/SPEKTRUM Compatible)

Sign up for price alert

Availability: In stock


We will send this product in 2 days.

Call us now for more info about our products.

Return purchased items and get all your money back.

Buy this product and earn 10 special loyalty points!

Product Description


Key Features
4 channels 
Preset failsafe system 
Compatibility (Spectrum and JR DSM2 and DSMX): DX6I,DX7,DX8,DSX7,DSX9 DSX11
1.25Pitch JST servo connectors 
Receiver Specifications:
Type: 4-Channel Park Fly DSM2 Receiver
Modulation: DSM2 /DSMX
Band: 2.4GHz 
Dimensions (L xWx H):29x16x7mm
Weight: 3g
Voltage Range: 3.6-10v 
Antenna Length Main RX: 29mm 
1.25Pitch JST servo connectors 

Binding Procedure
1. Put the binding harness into the Channel marked BIND. Next apply power to the receiver. Receiver’s LED should illuminate.
2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter. 

3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now.

4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions. 

General Notes: This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver.
The Spektrum brand is a trademark of Horizon Hobbies USA.


Write Your Own Review

You're reviewing: 2.4G 4-Channel MICROLITE DSM2 /DSMX Receiver JST (JR/SPEKTRUM Compatible)

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)